Chevy Cobalt Stalls

Chevy Cobalt stalls when Slowing down or Stopping

A car that stalls when slowing down or stopping can not only be an annoyance but it can also be dangerous. Imagine you are on the expressway with a lineup of cars behind you at almost full throttle and you will get the picture. This problem has been sometimes reported about the Chevy Cobalt. You must know one thing here – if your Chevy Cobalt stalls at any time, do not take it lightly. Diagnose the problem, find out what the cause is and take the proper remedial measures.

The following are some of the things you can do if your Chevy Cobalt stalls when slowing down or stopping.

1. When the car stalls, the problem is generally with the fuel system or the electrical system of the car. One of the commonest reasons why any car stalls is because the ignition is malfunctioning. The engine is not able to ignite the gas present in the cylinders. You can check two things here. First, and the most logical thing, is to check whether there is any gas present in the cylinder at all. The second thing that you can do is to check the electrical system of the car. Quite likely, there might be some fault developed there.

2. The second problem is that the fuel filter of the car might have got clogged, which does not allow the fuel to properly get ignited, causing the car to stall when it is slowing down or stopping. Check this. It is very easy to replace the fuel filter and it is quite cheap too. Look up the Chevy Cobalt manual to determine where your fuel filter is located and just replace it.

3. Sometimes, with the Chevy Cobalt, the distributor can be a problem. Adjusting the timing of the distributor could help the problem.

4. Chevy Cobalt cars have fuel injection. Any malfunction there can cause the car to stall too. Just check the injector if it is working fine. You can get a simple device known as a mechanic’s scope to determine if the injector is working fine. It should make a snapping noise when starting; if it does not make any sound, it is probably not working. You can replace the injector yourself too.

5. Do some basic maintenance of the car; that would help too. You can consider changing the wires, plugs, rotors and caps of the distributor. This is a simple thing to do; just make sure you have a couple of hours handy. These parts can undergo wear and tear over time and that would require them to be replaced periodically. In most cases, replacing these parts can take care of the stalling problem.

6. Replacing the spark plugs can also help. In most cases where the Chevy Cobalt stalls when slowing down or stopping, it is the spark plug at fault.

Remember that these are just some pointers of what to do when your Chevy Cobalt stalls when you put it in a smaller gear or when you stop it. However, there can be many more faults that you won’t be able to repair easily. These are some basic troubleshooting tips, but if they don’t work, taking the car to a mechanic could be the only solution.